Documentation Contents
Java Platform, Standard Edition Troubleshooting Guide
Contents    Previous    Next

6.2 Diagnose a Hung Process

If the application appears to be hung and the process appears to be idle, then the first step is to try to obtain a thread dump. If the application console is available, then press Control+\ (on Oracle Solaris or Linux), or Control+Break (on Windows) to cause the HotSpot VM to print a thread dump. On Oracle Solaris and Linux operating systems the thread dump can also be obtained by sending a SIGQUIT to the process (command kill -QUIT pid). If the hung process is capable of generating a thread dump, then the output is printed to the standard output of the target process.

After printing the thread dump, the HotSpot VM executes a deadlock detection algorithm.

The following sections describe various situations for a hung process.

6.2.1 Deadlock Detected

If a deadlock is detected it will be printed along with the stack trace of the threads involved in the deadlock. Example 6-1 shows the stack trace for this situation.

Example 6-1 Stack Trace for a Deadlock

Found one Java-level deadlock:
=============================
"AWT-EventQueue-0":
  waiting to lock monitor 0x000ffbf8 (object 0xf0c30560, a java.awt.Component$AWTTreeLock),
  which is held by "main"
"main":
  waiting to lock monitor 0x000ffe38 (object 0xf0c41ec8, a java.util.Vector),
  which is held by "AWT-EventQueue-0"

Java stack information for the threads listed above:
===================================================
"AWT-EventQueue-0":
        at java.awt.Container.removeNotify(Container.java:2503)
        - waiting to lock <0xf0c30560> (a java.awt.Component$AWTTreeLock)
        at java.awt.Window$1DisposeAction.run(Window.java:604)
        at java.awt.Window.doDispose(Window.java:617)
        at java.awt.Dialog.doDispose(Dialog.java:625)
        at java.awt.Window.dispose(Window.java:574)
        at java.awt.Window.disposeImpl(Window.java:584)
        at java.awt.Window$1DisposeAction.run(Window.java:598)
        - locked <0xf0c41ec8> (a java.util.Vector)
        at java.awt.Window.doDispose(Window.java:617)
        at java.awt.Window.dispose(Window.java:574)
        at javax.swing.SwingUtilities$SharedOwnerFrame.dispose(SwingUtilities.java:1743)
        at javax.swing.SwingUtilities$SharedOwnerFrame.windowClosed(SwingUtilities.java:1722)
        at java.awt.Window.processWindowEvent(Window.java:1173)
        at javax.swing.JDialog.processWindowEvent(JDialog.java:407)
        at java.awt.Window.processEvent(Window.java:1128)
        at java.awt.Component.dispatchEventImpl(Component.java:3922)
        at java.awt.Container.dispatchEventImpl(Container.java:2009)
        at java.awt.Window.dispatchEventImpl(Window.java:1746)
        at java.awt.Component.dispatchEvent(Component.java:3770)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:214)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"main":
        at java.awt.Window.getOwnedWindows(Window.java:844)
        - waiting to lock <0xf0c41ec8> (a java.util.Vector)
        at javax.swing.SwingUtilities$SharedOwnerFrame.installListeners(SwingUtilities.java:1697)
        at javax.swing.SwingUtilities$SharedOwnerFrame.addNotify(SwingUtilities.java:1690)
        at java.awt.Dialog.addNotify(Dialog.java:370)
        - locked <0xf0c30560> (a java.awt.Component$AWTTreeLock)
        at java.awt.Dialog.conditionalShow(Dialog.java:441)
        - locked <0xf0c30560> (a java.awt.Component$AWTTreeLock)
        at java.awt.Dialog.show(Dialog.java:499)
        at java.awt.Component.show(Component.java:1287)
        at java.awt.Component.setVisible(Component.java:1242)
        at test01.main(test01.java:10)

Found 1 deadlock.

The default deadlock detection works with locks that are obtained using the synchronized keyword, as well as with locks that are obtained using the java.util.concurrent package. If the Java VM flag -XX:+PrintConcurrentLocks is set, then the stack trace also shows a list of lock owners.

If a deadlock is detected, then you must examine the output in more detail in order to understand the deadlock. In the above example the thread main is locking object 0xf0c30560 and is waiting to enter 0xf0c41ec8, which is locked by thread AWT-EventQueue-0. However, thread AWT-EventQueue-0 is waiting to enter 0xf0c30560, which is locked by main.

The detail in the stack traces provides information to help find the deadlock.

6.2.2 Deadlock Not Detected

If the thread dump is printed and no deadlocks are found, then the issue might be a bug in which a thread waiting on a monitor that is never notified. This could be a timing issue or a general logic bug.

To find out more about the issue, examine each of the threads in the thread dump and each thread that is blocked in Object.wait(). The caller frame in the stack trace indicates the class and method that is invoking the wait() method. If the code was compiled with line number information (the default), then this provides direction as to the code to examine. In most cases you must have some knowledge of the application logic or library in order to diagnose this issue further. In general you must understand how the synchronization works in the application and in particular the details and conditions for when and where monitors are notified.

6.2.3 No Thread Dump

If the VM does not respond to Control+\ or Control+Break, then it is possible that the VM is deadlocked or hung for some other reason. In that case use The jstack Utility to obtain a thread dump. Use the jstack -F pid command to force a stack dump of the hung process. This also applies in the case when the application is not accessible or the output is directed to an unknown location.

In the jstack output, examine each of the threads in the BLOCKED state. The top frame can sometimes indicate why the thread is blocked (for example, Object.wait or Thread.sleep). The rest of the stack will give an indication of what the thread is doing. This is particularly true when the source has been compiled with line number information (the default) and you can cross reference the source code.

If a thread is in the BLOCKED state and the reason is not clear, then use the -m option to get a mixed stack. With the mixed stack output, it should be possible to identify why the thread is blocked. If a thread is blocked trying to enter a synchronized method or block, then you will see frames such as ObjectMonitor::enter near the top of the stack. Example 6-2 shows a sample mixed stack output.

Threads in the RUNNABLE state might also be blocked. The top frames in the mixed stack should indicate what the thread is doing.

One specific thread to check is VMThread. This is the special thread used to execute operations like garbage collection (GC). It can be identified as the thread that is executing VMThread::run() in its initial frames. On Oracle Solaris it is typically t@4. On Linux it should be identifiable using the C++ mangled name _ZN8VMThread4loopEv.

In general the VM thread is in one of three states: waiting to execute a VM operation, synchronizing all threads in preparation for a VM operation, or executing a VM operation. If you suspect that a hang is a HotSpot VM bug rather than an application or class library deadlock, then pay special attention to the VM thread.

If the VM thread appears to be stuck in SafepointSynchronize::begin, then this could indicate an issue bringing the VM to a safepoint. A safepoint indicates that all threads executing in the VM are blocked and waiting for a special operation, such as GC, to complete.

If the VM thread appears to be stuck in function, where function ends in doit, then this could also indicate a VM problem.

In general, if you can execute the application from the command line, and you get to a state where the VM does not respond to Control+\ or Control+Break, it is more likely that you have uncovered a VM bug, a thread library issue, or a bug in another library. When this occurs, obtain a crash dump. See Collect Core Dumps for instructions to gather as much information as possible, and submit a bug report or support call.

One other tool to mention in the context of hung processes is the pstack utility on Oracle Solaris operating system. On Oracle Solaris 8 and 9 operating systems, this utility prints the thread stacks for LWPs in the target process. On Oracle Solaris 10 operating system and starting with the JDK 5.0 release, the output of pstack is similar, though not identical, to the output from jstack -m. As with jstack, the Oracle Solaris 10 operating system implementation of pstack prints the fully qualified class name, method name, and bytecode index (BCI). It will also print line numbers for cases where the source was compiled with line number information (the default). This is useful for developers and administrators who are familiar with the other utilities on Oracle Solaris operating system that exercise features of the /proc file system.

The equivalent tool of pstack on Linux is lsstack. This utility is included in some distributions and otherwise obtained from sourceforge. At the time of this writing, lsstack reported native frames only.

Contents    Previous    Next

Oracle and/or its affiliates Copyright © 1993, 2022, Oracle and/or its affiliates. All rights reserved.
Contact Us