Inputs

Exterior

This color defines the background on which the spiral arms should be drawn.

Fill

This color is used to fill the spiral arms.

Scale [-∞00..+∞00%]

This setting defines the number of spiral arms. If set to 0%, no curvature will be created and the arms will run straight from the center outward. Changing the value from positive to negative will invert the spiral’s direction.

Arms [0..999999]

This setting defines the number of spiral arms that will be filled with the Inner color.

Outer Softness [0..10000%]

This setting can be used to soften the outer edges of the spiral arms. The arms will widen accordingly and the proportion of background color will reduce correspondingly.

Inner Softness [0..10000%]

This setting can be used to soften the color filling within the spiral arms. The arms’ width will remain unchanged.